Tender Notice No: PU/DLS/NS/SERB/EQUIP/2022/2 Date: 11/03/2022
Sealed quotations are invited from the Enlisted Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods/articles, subject to the following terms and conditions. The quotations must be submitted to Dr. Nazmiara Sabnam, Department of Life Sciences, Presidency University, (Main Campus), 86/1 College Street, Kolkata 700073.
Last date & time for submission of quotation is 18.03.2022 up to 3:30 P.M.
Consignment in details: |
||||
Sl. No. |
Description of items |
Brand/Make |
Quantity |
|
1. |
BOD INCUBATOR SHAKER
Technical Specifications:
· Capacity of flasks : 15 x 250 ml Technical Specification: · Temperature Range: 5°C to 60◦C ± 0.5°C / 1°C · Temp. Control: Electronic Controller with Digital Display. · Speed Range: Variable between 30 to 300 rpm.
· Drive Motor: Direct Current, Ball Bearing Type.
· Operable On: 220 Volts, Single Phase, AC Mains. · Additional facility for shaking of Culture Tubes and extra shelf. · An inner glass door for inspection of materials kept under test. · A lamp within the working chamber which operates immediately to opening the outer door. · UV lamp to sterilize the inner chamber and switch provided at the outer panel. · The shaker platforms are of easily replaceable type and can accommodate 1000 ml, 500 ml, 250 ml or 100 ml conical flasks. |
McEquip Part No. BODSHR-112 |
One |
|
HOT AIR OVEN
Technical Specifications: · Fully Automatic with automatic inbuilt digital timer (LED) · Oven Universal Digital with Air Circulating Fan
· Power Supply(Voltage): 220-230V
· Stainless Steel tray: 3 Numbers · Inner Chamber Size (inch): 15x15x18 · Inner body: Stainless Steel · Outer body: Mild Steel with powder coated · All the control switches & indicator lamps are fitted on the front panel
|
Any genuine brand |
One |
||
3 |
WEIGHING BALANCE · Verification Scale Intervals (e): 1 mg · Calibration: Motorized Internal Calibration · Display: LCD with back light · Response Time: 4 - 6 Sec · Pan Size (mm): 90 mm Ø
|
WENSAR PGB321 |
One |
|
4 |
DEEP FREEZER (-20°C)
Key Features: · Unique refrigeration system ensures faster cooling and better stability · Environment friendly refrigerant · Accurate microprocessor controller to ensure consistent cabinet temperature · Lock for safety · Temperature Display Technical Specification :
Drawer - 7 Cooling Method - Ventilated Defrost- Frost-free Refrigerant - R600a Ambient Temperature (C) 16 ~ 43 °C Temperature Range (C) -25°C
Voltage/Frequency (V/Hz) - 220V/50Hz Size Capacity (L/Cu.ft) - 371 Exterior Size (W x D x H) (mm) - 595x712x1860 Alarm - Sensor Malfunction, Temperature Controller Malfunction, and Door Ajar Accessories – Castor, Lock Other Certifications CE
|
Trufrost UF371 |
One |
|
5 |
Heating Block/Dry Bath Operating Temperature Range (°C / °F): Room Temperature to 100°C Display - Digital Size - 3”X “8 Warranty - 1 year from the date of Installation Provided with Suitable UPS/Stabilizer Accessories: a) One Block for centrifuge tube 15 ml and 50 ml b) One Block for microtube 1.5 ml
|
Babaji – DB- 3”X “8 |
One |
|
6 |
pH meter Specification: pH range: 0.00 to 14.00 pH Resolution & Accuracy: 0.01 & ±0.01 pH mV Range: ±199.9 mV; ±1999 mV Resolution & Accuracy: 0.1 mV & ±0.2 mV (within ±199.9 mV); 1 mV & ±2 mV (beyond ±200 mV) Temperature range: 0.0 to 100.0 °C Resolution & Accuracy: 0.1 °C & ±0.3 °C No. of Calibration points: Up to 3 points pH Buffer Options: USA (pH 4.01, 7.00, 10.01); NIST (pH 4.01, 6.86, 9.18) Memory: 50 Data Sets Temperature Compensation: Automatic/Manual (0 to 100 °C) Special Functions: Stability Indicator; Self-diagnostic; Hold & pH Slope/Offset Display , Power: 9VDC, using AC adapters 110VAC or 220VAC, 50/60 Hz Warranty - 1 year from the date of Installation |
EUTECH Instruments CyberScan pH 510 (pH TUTOR) |
One |
|
Note: a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.
b) Party is requested to keep in touch with Dr. Nazmiara Sabnam, Assistant Professor, Department of Life Sciences, Presidency University, Kolkata (Email: nazmiara.dbs@presiuniv.ac.in)before quoting the rate for better knowledge of specification, quality of material, etc.
c) Warranty must be mentioned in your offer for all the above items.
d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.
Finance Officer
Terms & conditions of the Quotation:-
1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.
2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.
3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.
4. Rate and amount of GST for each item is to be specified in the quotation.
5. DSIR Certificate would be provided to the L-1 Vendor against Proforma Invoice, if necessary, for the purpose of exemption of Customs duty / GST as per the extant Rules and Notifications.
6. Payment shall be made after successful delivery and installation of the product at the site as specified in the Purchase Order and on submission of the bill and other necessary papers duly certified by the competent authority, Presidency University. No advance payment will be made.
7. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.
8. Validity of the quotation will be at least 3(three) months from the closing date of the enquiry.
9. Sample must be attached with quotation in all possible cases.
10. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.
11. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.
12. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.
13. In all cases of disputes, the decision of the University shall be final & binding on you.
By order
About Presidency
Quick Links
Students
- Admissions
- Examinations
- GE/AECC
- Dean of Students Corner
- Career Counselling
- International Students
- PhD Students
- Student Grievance Redressal Committee (SGRC)
- Internal Committee for Persons with Disabilities
- Equal Opportunity Cell
- Anti-Ragging
- Internal Complaints Committee (ICC)
- Gender Sensitization and Prevention of Sexual Harassment Cell(GSPSHC)
- Migration
- The West Bengal Student Credit Card System
How to Find Us
Presidency University
(Main Campus)
86/1 College Street
Kolkata 700073
Presidency University
(2nd Campus)
Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Kolkata-700156
Contact details Presidency University Students Corner