Tender Reference Number:- Instruments /PU/SBT/UGC/AB/2021/2 dated 11/01/2021

Sealed quotations are invited from the Enlisted Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods/articles, subject to the following terms and conditions.

The quotations must be submitted to Dr. Avishek Banik, School of Biotechnology, Presidency University, Canal Bank Road, DG Block, Action Area 1D, Newtown, Kolkata-700156, West Bengal, India.

Last date & time for submission of quotation is 25/01/2021 up to 3:30 P.M.

Sl. No.



Approximate Quantity




· Stepless speed regulator with zero start interlock.

· Digital speed indicator.

· Dynamic brake.

· 0-99 minutes digital countdown timer.

· Imbalance detector with cutoff.

· Safety lid interlock to prevent cover opening during centrifugation.

· User friendly microprocessor control with Interactive LCD display

  • Menu driven ten programme memory
  • Choice of High brake, low brake and coasting
  • Imbalance high detector with cutoff

· Safety lid interlock to prevent cover opening during centrifugation

· Automatic unique safety rotor identification system

  • Speed holding accuracy 100 RPM
  • Self-diagnosis for errors

Technical Specification

Model- R – 24

Max. Speed- 17300 RPM

Max. RCF ‘g’ 27440

Max. tube size ml 100

Max. Capacity ml 400

W x D x H mm = 400x500x430

Connected Load KVA 0.8

Angle rotor 24*1.5 & 12*15 ml

R-248M & R-244M

REMI (Model: R – 24)



Mini Gel Tank


The Mini Gel Tank is compatible with a variety of Novex® mini gels,

NuPAGE® mini gels, and Bolt® Bis-Tris Plus gels. Each Mini Gel Tank

can accommodate up to two gels per run. The unique tank design enables

convenient side-by-side gel loading and enhanced viewing during use.

Optimized conditions using constant voltage allow for Bolt® Bis-Tris

Plus gels to be run in approximately 35 minutes. Run times may vary

depending on buffer conditions and power supplies being used.


Capacity: Up to 2 gels per run



Bolt™ Bis-Tris Plus Gels

Shipping Condition: Room Temperature




PowerEase™ 90W Power Supply (230 VAC)



Note: a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.

b) Party is requested to keep in touch in Dr. Avishek Banik (avishek.dbs@preseuniv.ac.in), Assistant Professor, School of Biotechnology, Presidency University before quoting the rate for better knowledge of specification, quality of material, etc.

c) Warranty must be mentioned in your offer for all the above items.

d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.

Finance Officer

Terms & conditions of the Quotation:-

1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.

2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.

3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.

4. Rate and amount of GST for each item is to be specified in the quotation.

5. DSIR Certificate would be provided to the L-1 Vendor against Proforma Invoice, if necessary, for the purpose of exemption of Customs duty / GST as per the extant Rules and Notifications.

6. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.

7. Validity of the quotation will be at least 3(three) months from the closing date of the enquiry.

8. Sample must be attached with quotation in all possible cases.

9. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.

10. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.

11. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.

12. In all cases of disputes, the decision of the University shall be final & binding on you.

By order

How to Find Us

Presidency University
(Main Campus)

86/1 College Street
Kolkata 700073

Presidency University
(2nd Campus)

Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Contact details Presidency University Students Corner