
Tender No: IHS/PU/SN/IRG-LTMT/EQUIPMENT/2026-27/01 Date: 29/10/2026
Sealed quotations are invited from the reputed vendors / enlisted vendors of
the University to quote their lowest possible rate for the supply of the
under-mentioned goods
/articles
, subject to the following terms and conditions.
The quotations must be submitted to Dr. Somsubhra Nath of Institute of Health Sciences (at the Newtown campus) of the University.
Last date & time for submission of quotation is 05/11/2026 up to 5-00 P.M.
Consignment in details:
|
Sl No. |
Item |
Features & Specification* |
Company |
Quantity |
|
1 |
CO2 INCUBATOR |
FEATURES: 1. Microcomputer controllerLED displays temperature,CO2 concentration ,run-time and timing. 2. UV Lamp for sterilizing the incubator. 3. High quality air filter to ensure the inside air quality. 4. Water tank for humidity in the chamber. 5. The working chamber to adopt round angle structure, easy to clean. 6. SMC brand gas circuit valves to ensure more stable CO2 concentration and less consumption of CO2 gas. SPECIFICATIONS Capacity: 160 Litres Heating: Air jacket Temp. Range: RT +5 ~ 60 °C Control Type: PID control Temp. Fluctuation: ≤ ±0.2°C Temp. Uniformity: ≤ ±0.3 °C(at 37°C) Time Setting: 999h or continuous Alarm: Audible and visual alarm;Over-temperature alarm; CO2 Concentration alarm. Material: External cold-rolled steel with painting Internal stainless steel Infrared sensor for accurate CO2 concentration. UV lamp for Sterilization Shelves: 2 pcs/ adjustable Door: Double Insulation Material: Polystyrene film CO2 Control: Infrared sensor Range 0~20% CO2 concentration control error 5%±0.1% Humidification Type: Water tank for natural evaporation Caster: Footmaster caster * to align with ‘BJPX-C160’ model system |
BIOBASE or Similar |
1 |
Note:
a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.
b) Party is requested to keep in touch in Dr. Somsubhra Nath , Institute of Health Sciences, Presidency University (somsubhra.ihs@preseuniv.ac.in, 9674097699) before quoting the rate for better knowledge of specification, quality of material, etc.
c) Warranty, if applicable, must be mentioned in your offer for all the above items.
d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.
Finance Officer
Terms & conditions of the Quotation:-
1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.
2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.
3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.
4. Rate and amount of GST for each item is to be specified in the quotation.
5.Payment shall be made after successful delivery and installation of the product at the site as specified in the Purchase Order and on submission of the bill and other necessary papers duly certified by the competent authority, Presidency University. No advance payment will be made
6. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.
7.Validity of the quotation will be at least 3 (three) months from the closing date of the enquiry.
8. Sample must be attached with quotation in all possible cases.
9. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.
10. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.
11. The bidder must submit scanned copies of the following documents:
a. Certificate of Incorporation (in case of company) / partnership deed (in case of firm), etc.
b. Valid trade license
c. Copy of the PAN Certificate
d. GST Registration Certificate
12. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.
13. In all cases of disputes, the decision of the University shall be final & binding on you.
By order
About Presidency
- Introducing the University
- History
- Giving to Presidency
- Best Practices
- Institutional Development Plan
- Vision & Mission
- Code of Conduct (Employees)
- Students' Manual
- Organisation Structure
- IQAC
- Newsletter
- NSS
- Portal of the office of the Controller of Examinations
- ONLINE APPLICATION FORM FOR MIGRATION CERTIFICATE
Quick Links
Students
- Admissions
- Examinations
- GE/AECC
- Dean of Students Corner
- Career Counselling
- International Students
- PhD Students
- Student Grievance Redressal Committee (SGRC)
- Internal Committee for Persons with Disabilities
- Equal Opportunity Cell
- Anti-Ragging
- Internal Complaints Committee (ICC)
- Gender Sensitization and Prevention of Sexual Harassment Cell(GSPSHC)
- Migration
- The West Bengal Student Credit Card System
How to Find Us
Presidency University
(Main Campus)
86/1 College Street
Kolkata 700073
Presidency University
(2nd Campus)
Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Kolkata-700156
Contact details
Presidency University Students Corner