Tender No- Instruments /PU/IHS/ICMR/JJJ/2023/1   Date: 10/07/2023

Sealed quotations are invited from the Reputed Vendors/Enlisted Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods/articles, subject to the following terms and conditions.

The quotations must be submitted to Dr. Junaid Jibran Jawed , Institute of Health Sciences, Presidency University-2 nd Campus, Plot No. DG/02/02, Premises No. 14-0358, Action Area 1D (Newtown), (Near Biswa Bangla Convention Centre), Kolkata- 700156, West Bengal, India.

Last date & time for submission of quotation is 18/07/2023 up to 3:30 P.M.

Sl. No.



Approximate Quantity


Inverted Phase Contrast microscope

Technical specification

1. Body: Main Body with integrated diascopic fixed illumination pillar, build-in diascopic LED illumination, objective elevation system for focusing, eyepiece tube, diascopic illumination brightness adjuster, illumination LED ON/OFF.

2. Optical System: Infinity Optical system

3. Illumination: High luminescence white LED diascopic illumination. Should have fly-eye lens built-in.

4. Eyepiece: Pair of 10X (22mm or more FOV)

5.Focus:Via nosepiece up/down movement, coarse & fine, Up 7mm /Down1.5mm.

6. Tube: Binocular Tube inclined at 45°, Pupillary distance 50-75mm.

7. Nose piece: Quintuple (5 position) or more.

8. Stage: Plain Stage & Mechanical Stage with handle, cross travel 126mm x 78mm equipped with auxiliary stage holder.

9. Holder: Universal Holder for Terrasaki plate holder, glass slide,35- 65 petri dish,Hemocytometer.

10. Condenser: ELWD Condenser. 0.3, WD 0.75mm, removable.

11. Phase Contrast Attachment: Centerable Phase Slider & Phase ring.

12. Observation: Brightfield, Phase Contrast.

13. Objectives:

Achromat 4X (N.A.0.1, W.D.30mm)

Achromat 10X DL (N.A.0.25, W.D 7mm) Ph1,

Achromat LWD DL 20X (N.A.0.4, W.D.3.9mm) Ph1

Achromat LWD ADL 40X (N.A.0.55, WD 2.1mm) Ph1



Note: a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.

b) Party is requested to keep in touch in Dr. Junaid Jibran Jawed (junaid.dbs@preseuniv.ac.in), Assistant Professor, Institute of Health Sciences, Presidency University-2 nd Campus, Kolkata before quoting the rate for better knowledge of specification, quality of material, etc.

c) Warranty must be mentioned in your offer for all the above items.

d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.

Finance Officer

Terms & conditions of the Quotation:-

1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.

2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.

3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.

4. Rate and amount of GST for each item is to be specified in the quotation.

5. DSIR Certificate would be provided to the L-1 Vendor against Proforma Invoice, if necessary, for the purpose of exemption of Customs duty / GST as per the extant Rules and Notifications.

6.Payment shall be made after successful delivery and installation of the product at the site as specified in the Purchase Order and on submission of the bill and other necessary papers duly certified by the competent authority, Presidency University. No advance payment will be made.

7. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.

8. Validity of the quotation will be at least 3(three) months from the closing date of the enquiry.

9. Sample must be attached with quotation in all possible cases.

10. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.

11. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.

12. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.

13. The bidder must submit scanned copies of the following documents:

a. Certificate of Incorporation (in case of company) / partnership deed (in case of firm) etc.

b. Valid trade license

c. Copy of the PAN Certificate

d. Certificate of Authorized Dealership from the Original Equipment Manufacturer, where ever applicable.

14. In all cases of disputes, the decision of the University shall be final & binding on you.

By order

How to Find Us

Presidency University
(Main Campus)

86/1 College Street
Kolkata 700073

Presidency University
(2nd Campus)

Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Contact details Presidency University Students Corner