Tender No: PU/SERB-SURE/2024/CHEM/AM_03   Date: 11/06/2024

Sealed quotations are invited from the Enlisted Vendors/Reputed Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods, subject to the following terms and conditions. The quotations must be submitted to Dr. Avijit Mondal, Assistant Professor, Department of Chemistry, Presidency University, 86/1, College Street, Kolkata – 700 073. (Mobile: 9674922986)

Last date & time for submission of quotation is 19 th June, 2024 up to 5:00 p.m.

Consignment in details: -

Sl. No.

Particulars

Make & Model no.

Quantity

1.

Non-Refrigerated Centrifuge with Fixed Angle Rotor 24 x 2ml

Specifications:

Rotor Capacity (Max): 4 x 100 ml32 x 6 ml (Swing out) & 30 x 15 ml (fixed rotor)

Max RPM / RCF (xg):15000 RPM /22388 g(RPM and RCF varies as per rotor)

Speed:Variable speed from 500 to 15000 RPM

Motor type:Brushless DC

Display:Large back-lit LCD display for easy setting & reading of multiple parameters (Speed &Time)

Adjustable ramp & brake speeds: 1up to 9 speed selection

Safety:Lid Lock Safety

Timer Setting:30 sec to 999 mins& infinitemode

Option:Single equipment for different work protocols with an appropriate choice of rotors

Rotor:Fixed Angle Rotor 24 x 2 ml

Warranty: years

Neuation&iFUGE UC02

Rotor: Neuation&UC-600

01

2.

Analytical Balance

Specifications

Max. (Capacity):50 / 220g

Readability (D):0.01 mg / 0.1 mg

Repeatability (+/-):0.02 mg / 0.2 mg

Min. (Capacity):1 mg

Calibration:Internal Calibration

Response Time:4-6 seconds

Sensitivity Drift (+/-):2 ppm/°C

Unit:g, mg, ct, oz etc.

Display: Touch Screen

Operating Temperature Range (°C):15 to 30

Warranty/Guarantee : 2 years

Wensar/

&

TAB4T

01

3.

Vortex Mixer

Specifications:

Max Speed: 4200 RPM

Orbital diameter: 4 mm

Motor Type: Brushless DC

Display:Digital display

Pulse mode: Programmable Pulse

Max Load Capacity: 500 gm

Warranty: 1 years

Neuation&iSWIX VT

01

Note: a) The sealed cover should be duly superscribed with the Enquiry No. & Date.

b) Party is requested to keep in touch with Dr.Avijit Mondal, Assistant Professor, Department of Chemistry, Presidency University before quoting the rate for better knowledge of specification, quality of material, etc.

c) Warranty must be mentioned in your offer for all the above items.

d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in Point No.3 below.

e) Rate and amount of GST for each item is to be specified in the quotation.

Finance Officer

Terms & conditions of the Quotation:-

1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.

2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.

3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.

4. Rate and amount of GST for each item is to be specified in the quotation.

5. Payment shall be made after successful delivery and installation of the product at the site as specified in the Purchase Order and on submission of the bill and other necessary papers duly certified by the competent authority, Presidency University. No advance payment will be made.

6. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.

7. Validity of the quotation will be at least 03 (three) months from the closing date of the enquiry.

8. Sample must be attached with quotation in all possible cases.

9. Our Enquiry No. and Date & Purchase Order No. and Date must be quoted on all correspondences and those should be duly signed and seal.

10. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.

11. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.

12. The bidder must submit the copies of the following documents:

a. Certificate of Incorporation (in case of company) / partnership deed (in case of firm) etc.

b. Valid trade license

c. Copy of the PAN Certificate

13. In all cases of disputes, the decision of the University shall be final & binding on you.

By order

How to Find Us

Presidency University
(Main Campus)

86/1 College Street
Kolkata 700073

Presidency University
(2nd Campus)

Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Kolkata-700156
Contact details Presidency University Students Corner

RTI