Tender No: Balance/24-25/(EEQ/2023/000940)/DLS/Instrument 1   Date: 18/06/2024

Sealed quotations are invited from the Reputed Vendors / Enlisted Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods/articles, subject to the following terms and conditions. The quotations must be submitted to Dr. Pralay Majumderof Department of Life Sciencesof the University.

Last date & time for submission of quotation is26/06/2024(Date) … up to5.00 P.M.

Consignment in details:-


Sl No



Approximate Quantity


1. Capacity: Maximum capacity: 220 g/82 g

2. Readability: Readability: 0.1 mg/0.01 mg

3. Repeatability, typical: 0.015 mg

4. Linearity deviation: 0.2 mg

5. Settling Time: 4 s

6. Adjustment: Internal adjustment

7. Connectivity: RS232 to connect to PC, printer or bar code reader; USB to connect to PC

8. Display: High contrast display (HCD)

9. Temperature accuracy (±):0.0002 ppm/°C.

10. Minimum Weight (USP, 0.1%, typical): 30 mg

11. Weighing Pan Diameter: 80 mm

12. Balance dimensions (W × D × H): 247 × 358 × 331 mm.

13. Housing: Die-cast aluminium, plastic PA-12

14. Hygienic Design: Yes

15. Power: AC Power supply

16. Resolution: 0.1 mg/0.01 mg

17. Weight of balance: 6.8 kg.

18. ErgoDoor: The right door can be opened from the left side and vice versa.

19. Connectivity: RS232 to connect to PC, printer or bar code reader; USB to connect to PC

20. HRT weighing cell : With two built-in weights, for constant accuracy over the entireweighing range.

21. FACT: Fully automatic time- and temperature controlled internal adjustment.

22. SmartTrac: Shows how much of the entire weighing range has been used.

23. SmartKeys: Programmable keys for shortcut access to preferred applications.

24. QuickLock: Fast and convenient dismantling of the draft shield.

25. ErgoSens: For touch-free operation of the balance

26. Protection: Balance settings can be password protected



Note: a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.

b) Party is requested to keep in touch with Dr. Pralay Majumder of Department of Life Sciences , Presidency University before quoting the rate for better knowledge of specification, quality of material, etc.

c) Warranty must be mentioned in your offer for all the above items.

d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.

e) Rate and amount of GST for each item is to be specified in the quotation.

Finance Officer

Terms & conditions of the Quotation:-

1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.

2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.

3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.

4. Rate and amount of GST for each item is to be specified in the quotation.

5. Payment shall be made after successful delivery and installation of the product at the site as specified in the Purchase Order and on submission of the bill and other necessary papers duly certified by the competent authority, Presidency University. No advance payment will be made.

6. Validity of the quotation will be at least 3(three) months from the closing date of the enquiry.

7. Sample must be attached with quotation in all possible cases.

8. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.

9. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.

10. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.

11. The bidder must submit photocopies of the following documents:

a. Certificate of Incorporation (in case of company) / partnership deed (in case of firm) etc.

b. Valid trade license

c. Copy of the PAN Certificate

d. GST Registration Certificate

12. In all cases of disputes, the decision of the University shall be final & binding on you.

By order

How to Find Us

Presidency University
(Main Campus)

86/1 College Street
Kolkata 700073

Presidency University
(2nd Campus)

Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Contact details Presidency University Students Corner