Tender Notice No: -No-Instruments /PU/SBT/UGC/JJJ/2022/1   Date: 04/01/2022

Sealed quotations are invited from the Enlisted Vendors of the University to quote their lowest possible rate for the supply of the under-mentioned goods/articles, subject to the following terms and conditions.

The quotations must be submitted to Dr. Junaid Jibran Jawed, School of Biotechnology, Presidency University, Canal Bank Road, DG Block, Action Area 1D, Newtown, Kolkata-700156, West Bengal, India.

Last date & time for submission of quotation is 14/01/2022 up to 3:30 P.M.

Sl. No.

Particulars

Brand/Make

Approximate Quantity

1

Vertical Autoclave

Technical specification

It should be electrically operated, Pressure Switch Controlled, provided with Low Water-level Cut-out, Device, model IIC-AV-2 or SimilarDimension of working chamber: 300 mm Diameter (minimum) x 500 mm, Deep (minimum) (38 lit. or more)

Pressure Range up to 20 psi

• Hydraulically tested up to 100%

• Stainless Steel Inner Chamber, Lid and Ring

• MS (mild steel) outer body

• Stainless Steel Perforated Basket

• Paddle lifting arrangement

• Fitted with ISI marked immersion heaters

• Adjustable spring-loaded safety release valve with repeatperformance.

• Complete with water-level cut out device

• 220/230 Volts, Single Phase, AC Mains; Wattage 3 Kilowattwith Automatic Pressure Control Switch – functions interlocking theheaters on set operable pressure thereby saving electrical energy andensuring safety in operation.

KRIC

1

2

Micropipette

Technical specification

Fully autoclavable with enhanced UV resistance, ergonomic, comfortable, and ultra light weight, superior accuracy and precision, locking counter prevents accidental volume fluctuations, easily identifiable pipette using detachable color-coded drops, Reverse pipetting option for accuracy, precise aspirating and dispensing of viscous liquids , Piston resistant to any chemicals and vapour, Display in 4 digit with accurate volume

· Adjustable-Volume Pipettor; 0.5 to 10 uL

· Adjustable-Volume Pipettor; 0.1 to 2.5 uL

· Adjustable-Volume Pipettor; 10 to 100 uL

· Adjustable-Volume Pipettor; 20 to 200 uL

· Adjustable-Volume Pipettor; 100 to 1000 uL

Cole Parmer

1

3

Micro Centrifuge

Technical Specification

· Speed Regulator from 2000 to 16000 in variation of 100 rpm

· Last test parameter recall and displays automatically on LCD

Supply completed with following accessories:

· Rotor Head to accommodate High speed Micro Centrifuge Max. R.P.M. 16000 and r.c.f 16800

· Heavy duty plastic injection moulded body.

· Stainless Steel protection bowl.

· Fitted with well balance universal motor having long life with high grade carbons.

· 2 lines of 16 character LCD display of r.p.m., R.c.f, set time and run time

· Digital timer which can be set from 0-99 minutes in interval of 1 minute.

· Microprocessor based, programmable 12 eppendorf/ Micro Centrifuge Tubes with cover of 1.5ml /2ml (12 x 1.5/2ml)

· Reduction adopters for 0.2/0.5ml eppendorf (Micro Centrifuge Tubes).

· Supply is complete with head Puller, Spanner, Instruction manual, Cord & plug to work on 220 volts 50Hz A.C

Biolinkk

1

4

Vortex Mixer

Features

· Mini and compact appearance powerful function sucker type under-chassis super shockproof, ideal for high speed operation.

· Multiple mixing modes, touch-operation, continuous operation and timing set.

· Wide speed range: 0-3000rpm/min. Stable low speed, powerful high speed.

· Shaking block convenient for replacement, stable and reliable, sturdy and durable eccentric bearing design.

· Various shaking block adapters (suitable for Eppendorf tube).

Technical specification

· Operation : Knob + Scale

  • Orbit : 3mm
  • Shaking Mode : Circle

· Operation Mode : Continuous Running/Short Mix

  • Speed Range : 0-2500rpm
  • Voltage : AC220V/AC110V,50/60Hz
  • Power : 60W

· Optional Accessories : All

  • Dimension (mm) : 132 x 156 x 150
  • Net Weight : 2.4 kgs

Geno Technology

1

Note: a) The sealed cover should be duly superscribed with the enquiry no & date and name of the item quoted in block letter.

b) Party is requested to keep in touch in Dr. Junaid Jibran Jawed (junaid.dbs@preseuniv.ac.in), Assistant Professor, School of Biotechnology, Presidency University before quoting the rate for better knowledge of specification, quality of material, etc.

c) Warranty must be mentioned in your offer for all the above items.

d) Please make sure to mention unit price and cumulative price for all items that should be inclusive of all taxes, duties and other charges as stated in point no.3 below.

Finance Officer

Terms & conditions of the Quotation:-

1. The bidder must be GST-Registered (photocopy of the GST Registration Certificate to be provided along with the quotation). Quotations of the unregistered dealers would be summarily rejected.

2. The quotations should be made by the vendors in their original letterheads clearly indicating the aforesaid goods/articles in details.

3. Price quoted should be inclusive of GST, installation, commissioning and delivery charges up to Presidency University.

4. Rate and amount of GST for each item is to be specified in the quotation.

5. DSIR Certificate would be provided to the L-1 Vendor against Proforma Invoice, if necessary, for the purpose of exemption of Customs duty / GST as per the extant Rules and Notifications.

6. Payment shall be made after successful delivery and installation of the product at the site as specified in the Purchase Order and on submission of the bill and other necessary papers duly certified by the competent authority, Presidency University. No advance payment will be made.

7. The above Rate Format is to be strictly followed. In case a bidder is unable to quote the rate against any item, the rate should remain blank for the respective Serial No. But in no case the row against the said Serial No. should be deleted by the Bidder.

8. Validity of the quotation will be at least 3(three) months from the closing date of the enquiry.

9. Sample must be attached with quotation in all possible cases.

10. Our enquiry no and date & Purchase order no. and date must be quoted on all correspondences and those should be duly signed and seal.

11. Bidders must as far as possible, arrange to supply the materials within the stipulated time mentioned in the purchase order. This delivery time must be strictly adhered to. Failure to supply within the specified time will lead to cancellation of the order without notice.

12. The University reserves the right to accept or reject any quotation in part or full without assigning any reason thereto.

13. In all cases of disputes, the decision of the University shall be final & binding on you.

By order

How to Find Us

Presidency University
(Main Campus)

86/1 College Street
Kolkata 700073

Presidency University
(2nd Campus)

Plot No. DG/02/02,
Premises No. 14-0358, Action Area-ID
New Town
(Near Biswa Bangla Convention Centre)
Kolkata-700156
Contact details Presidency University Students Corner

RTI